Penetrates to allow movement – locks, tools, zippers, gears
Protects against corrosion – instruments, tools, bikes, rods and reels, metals, garden tools
Cleans most surfaces and removes – grime, adhesives, tar and gum, fingerprints
What materials is this product suitable for?
Metals
Steel
Iron
Copper
Brass
Aluminium
Magnesium alloys
Machinery
Rusted parts
How To Use
For General Use:
Spray affected areas with RP7 and allow 5 minutes for product to penetrate.
To Start Wet Motors (Cars, boats, movers etc.):
Remove distributor cap, wipe with a dry rag if soiled and then spray with RP7.
Replace cap and spray around distributor cap, spark plugs, coil, generator, starter motor, leads, etc. RP7 draws out moisture which causes ignition short circuits – helps maintain correct electrical performance.
To Penetrate And Loosen:
Spray RP7 on seized or stiff joints, nuts, bolts, etc.
Allow 5 minutes to penetrate and if necessary tap lightly. Repeat application if needed in severe cases. Use RP7 as a general purpose lubricant – eliminate squeaks and keep mechanisms functioning smoothly.
To Protect Against Rust And Corrosion:
Simply spray RP7 periodically over nuts, hinges, linkages, garden tools or other metal parts.
RP7 penetrates into confined spaces to displace moisture and protect against rust. RP7 will not harm rubber or paintwork. The duration of protection obtained using RP7 will vary depending on the type of material being protected and the conditions of exposure.
Handy Tips
Spray RP7 on seized or stiff joints, nuts, bolts, etc. Allow 5 minutes to penetrate and if necessary tap lightly. Repeat application if needed in severe cases. Use RP7 as a general purpose lubricant – eliminate squeaks and keep mechanisms functioning smoothly.
The duration of protection obtained using RP7 will vary depending on the type of material being protected and the conditions of exposure.
If the surface is to be painted, wash with mineral turpentine after RP7 has been applied.